Poppys WoodTech - 7mm Scale items

7mm New Items

  • ImgBallast Brake Departmental Van, LNER Diag203 widespread use into TOPS period £49.50 The kit includes body, roof, internal furniture and building jigs, also available brass chassis sections for the kit £17.50.
  • ImgProTrack aligners from ModelTech ready for soldering rail and power cables. 4 ends in a pack £10.

    Fits 2mm sleepers e.g. C&L Finescale. Poppy's fillers are available for Peco track. £3.50 for 4

    .
  • ImgWagon Turntable £6.50 A useful addition to quaysides and small yards.
  • ImgNew to our range. NER clerestory coaches, this is diag7.
    Body kit only £79.50. Body mouldings now available. Beading options available to order. Check the full range of available diagrams on our information sheet. (PDF)
  • ImgUseful new addition to our assembly jigs, this one for axle spacing. 1/8inch axles, spec may evolve. £8.50
  • ImgBR Brake Van interior £8.95. Variants to fit M&M, First Class and Connoisseur kits.

7mm Coach Bodies

  • ImgNew to our range. Ballast Brake Departmental Van LNER diag203, 1948 to TOPS and preserved.Body kit including jigs £49.50.
  • ImgThe kit includes body, roof, internal furniture and jigs for assembly. Body kit now available, including instructions how to detail and make your own chassis. Also available brass chassis sections for the kit £17.50.

  • ImgNorth Eastern 6 wheel coach bodies;
    5 compartment 3rd Diag. 19 and Brake 3rd Diag. 15, both £49.50.
  • ImgNew to our range. NER diag7 composite.
    7 compartments + Locker clerestory.
    Body kit only £79.50. Body mouldings now available. Beading options available to order. Check the full range of available diagrams on our information sheet. (PDF)

  • ImgAll coach kit orders include a cradle to form the roof and ensure each roof matches the body.
  • ImgHighland Railway 6 wheel coach bodies;
    5 compartment 3rd Diag.9 and 4 comp't composite with Locker Diag.19, both £49.50.
  • ImgLBSC HorseBox moulding set (Highland 6 wheel coach set also available)£23.00
  • ImgNER 6 wheel coach moulding set £25.00
  • ImgAdjustable 6 wheel chassis for our 6 wheel coach range and other uses. Uses Cleminson principle to position centre axle and end axles are compensated,£29.50 ea.
  • ImgFor each coach in the 6 wheel range we can provide a matching underframe kit. £4.00 each.
  • ImgLBSCR Stroudley 'Twin' Horse Box. Body Kit £39.50
    Roof panel shown smooth side out.
  • ImgLBSCR Stroudley 'Double' Horse Box. Body Kit £39.50
    Roof panel shown planked side out
  • ImgEverything loaded and ready to go!
  • ImgReady for a days at the Races?

7mm Trackside

  • ImgCoal Platform £15.50
    Walls can be attached at platform or ground level. Platform size 60x120mm
  • ImgBarrow Crossing £6.50
    Kit includes sufficient for a double track crossing. Surface size 42x175mm.
  • ImgSmall Timber Goods or Provender Shed £29.50
    The shed has doors on both sides, and includes textured roof covering.
  • ImgWagon Turntable £6.50. Provides a surface covering for a wagon turning facility and extra interest for those Warehouse or quayside settings.
  • ImgPlatform Canopy - 400mm £27.50 800mm £55.00
    Includes; trusses, framing, valances and roof panels. 100mm wide x 48mm high. Alternative valance patterns can be provided on request.
  • Canopy Posts - £24.00 for 400mm canopy length of 5 Solid cast posts -
    A set with one hollow post is also available to compliment our canopy light kit; £26.00 set.
  • ImgCanopy Lighting Set £6.50. Set of 12 LEDs
    12 LEDs arranged as 4 sets of 3 to compliment our Platform Canopy. ** Maximum of 12 volts **
  • ImgRural Platform £18.75
    Many uses in rural, light industrial or milk depot locations. Platform size 70x280mm.
  • ImgPlatform Ramp £11.25
    Matches our Rural Platform or stand alone to reach brick or raised platforms. Platform size 70x140mm.
  • ImgShed Doors £3.75
    Pair of doors for goods light industrial or milk depots. Each door 70mm high x 52mm wide.
  • ImgCoal Staiths £11.50
    Our original staithes pattern, with eight panels to build into combinations of your choice.
    Size of this horizontal configuration is 240mmx60mm.
  • ImgVertical Coal Staiths £11.50
    Vertical Sleeper Coal Staith panels also has eight panels to build into combinations of your choice.
    Go to our customer photos page for ideas.
  • Img Buffer Stop £5.75
    Used sleeper construction. Complete the buffer stop wth one of our warning light kits.
  • ImgWarning Lamp kit £7.50 *** back in stock.
    Includes LED, larger switch, larger battery and holder. Shown here on our sleeper built Buffer Stop.
  • ImgRoad Crossing £5.00
    Used sleeper construction.
    Surface size 119x175mm.
  • Cattle Pens £10.75
    Each kit includes fence panels and gates of a modular construction to make the facility shown here, but flexible to build one that suits your location.
  • ImgCattle Pen Ramp Fence £4.75
    Each kit includes 8 fence panels, here shown in 2 rows of 4. Compliments our Cattle Pens, or can stand alone as a fence for inclines.
  • ImgCattle Grid £3.00 Each kit includes parts for 2 grids - note; does not now include metal rolling parts.
    Keeps livestock on the side of the boundary where they are meant to be – kits are the width of common roadway.
  • ImgGoods Platform £13.75 ** Back in stock **.
    Kit contains 2 ramp walls, 2 straight walls and a cobble surface, sufficient to make the platform shown with our cattle pens. Available with either brick or stone walls.
  • ImgCountry Milk Pick Up Two kits ideal for country lanes before or after milking; one with cast churns and base £7.50, the other just a platform £3.75.

7mm Scale Fencing

  • ImgTraditional Midland Style £10.50
    Each kit includes 5x18ft panels – totals 630mm length
    Template for straight or sloping ramp £2.25
    Starter Set £12.75
  • ImgDiagonal Midland Style £10.50
    Each kit includes 5x18ft panels – totals 630mm length
    Template for straight £2.25
    Starter Set £12.75
    Not a Midland modeller? They are only the pattern, think of Midland as 'boundary' fence because of the height.
  • ImgGate Set available in 3 sizes, all £3.75 per set
    2x4’3” and 2x3’3” wide (4 gates per set)
    2x 6’0” (2 per set), and 2x 8’0” (2 per set)
  • ImgFirst sample cut - Inspection by the boss!
    Difficult to believe, this was back in May 2013 - nearly 10 years ago! The close-boarding is for crossings.
  • ImgLNWR Style £10.50. Each kit includes 8x9’9”ft panels, totals 545mm length. Template £2.25; straight or ramp. Starter Set Straight or Ramp £12.75
  • ImgGate Set now available
    to match LNWR fencing £3.75 per set
    2x4’3” and 2x3’3” wide (4 gates per set)
    Not a LNWR modeller? They are only the pattern, think of LNWR as 'security' because of the heights.
  • 3bar Lineside Fencing £10.50
    Each kit includes 12x9ft panels – totals 756mm length - nearly 30inches. Kits can be built with or without stays.
  • 4bar Lineside Fencing £10.50
    Each kit includes 12x9ft panels – totals 756mm length - nearly 30inches. Kits can be built with or without stays.
  • 5 Bar gates to match Lineside Fencing £3.75
    Each gate is 9'6" wide" Kits can be built with or without diagonals and includes posts. Also sold in pairs.

7mm Scale Tools

  • ImgMeasuring Stick £5.00
    More details on our Tools page
  • ImgBallasting Box £9.75
    More details on our Tools page
  • Img7mm Loco Builder's Box, available in 5 versions in 7mm,
    Small (for industrial locos and tenders) £33, Medium (up to 35ft footplate) £35, Large (over 35ft) £39, 8 Coupled £42, and 10 Coupled £45
    More details on ourTools page
  • ImgA handy tool to keep your kits square £2.50
  • ImgLine up your boiler fittings 'Straight Down the Middle'
  • ImgAlign the tool from the cab side then place your fittings aligned to the shilouette and vertical lines. £3.50
  • Img
    7mm Loco Planked Floor Panel £2.00
    60 x 60mm, One size – cut to fit
  • Img
    Loco Planked Floor Panel £3.50
    Specially shaped for the Hachette LNER A3 and A4 locomotives

7mm Scale Valances

  • ImgSouthern Valance (3 X 29cm) £12.50
  • ImgMidland Valance (3 X 29cm) £12.50
  • ImgGreat Eastern Valance (3 X 29cm) £12.50
  • ImgGreat Western Valance (3 X 29cm) £12.50
    GWR valance now also available as a 2 hole varient and canopy and end shapes
  • ImgCanopy Ends, influenced by the Great Eastern, £10.00
    Packs of 4, either Straight or Curved both 147mm wide
  • ImgHighland (Mallaig) Valance (3 X 29cm) £10.00 (sale price)
    Based on Mallaig station West Highland Extension


  • ImgGWR entrance canopies, and platform ends available to order
    £ - send details of your reqirements for the location you are modelling.
  • ImgSECR, LBSCR valance (and other railways).
    Based on Folkestone, 3x29cm £12.50

7mm Scale Wagon Interiors

  • ImgBR 13 ton Highbar £5.00
    Floor and sides inserts for M&M Models wagon kits
  • ImgBR Medfit £2.50
    The generic floor insert for many wagons including
    M&M Models wagon kits
  • ImgBR Pipe £5.50
    Floor, side doors and ends inserts for wagons including M&M Models wagon kits
  • ImgFloor only for longer wagons;
    Bogie C - up to 45’ bed, 315mm £4.75
    Bogie E - up to 32’ bed, 224mm £3.75
    Floor inserts for many wagons including for
    M&M Models wagon kits
  • Great Western 3, 4, 5 and 7 Plank side doors £5.50
    Floors and ends inserts for wagons including CooperCraft now Slaters andPOWSIDESwagon kits
  • Midland 5 Plank side or side and end doors £5.50
    Floors and ends inserts for wagons including Slaters 7027, 7028 andPOWSIDESwagon kits
  • Gloucester 5 Plank side and end doors £5.50
    Floors and ends inserts for wagons including Slaters 7055 andPOWSIDESwagon kits
  • ImgGloucester 6 Plank side doors £5.50
    Floors and ends inserts for wagons including Slaters 7035 andPOWSIDESwagon kits
  • ImgGloucester 6 Plank side and end doors £5.50
    Floors and ends inserts for wagons including Slaters 7036 andPOWSIDESwagon kits
  • ImgGloucester 5 Plank side doors £5.50
    Floors and ends inserts for wagons including Slaters 7044 andPOWSIDESwagon kits
  • ImgGloucester 7 Plank side or side and end doors £5.50
    Floors and ends inserts for wagons including Slaters 7058 or 7059 andPOWSIDESwagon kits
  • ImgChas Roberts side doors £5.50
    Floor, sides and ends inserts for wagons including Slaters 7040 andPOWSIDESwagon kits
  • ImgChas Roberts side and end doors £5.50
    Floor, sides and ends inserts for wagons including Slaters 7041 andPOWSIDESwagon kits
  • ImgRCH 7 Plank side door £5.50
    Floor, sides and ends inserts for wagons including Slaters side door 7048, or side and end doors 7047, andPOWSIDESwagon kits
  • ImgRCH 8 Plank side and end doors £5.50
    Floor, sides and ends inserts for wagons including Slaters side door 7046, or side and end doors 7045, andPOWSIDESwagon kits
  • ImgS&DJR Van Conversion £3.75
    Converts Slaters MR 10ton covered wagon 7024 into cupboard door version for S&DJR, Cheshire Lines, and MR Road and Banana van.
  • ImgBR Brake Van interior. £8.95 Variants to fit M&M, First Class and Connoisseur kits.
  • ImgNew wagon inserts option to fit 3H wagon Kits 3 plank drop side, 5 plank side doors and 7 plank 'London' doors all at £5.50

  • ImgTail Light kit £6.50
    Includes LED, small switch, battery and holder.
  • ImgBrake Van Veranda £3.75
    End panel inserts for M&M Models wagon kits
  • ImgBuild Your Own 5 plank kit and 7 plank assembled
    Inspired by "Decorate your own P.O. wagon" in
    May 2018 Gauge 0 Guild Gazette; all sizes £5.00
  • ImgAssembled 7 plank Build Your Own wagon on a
    4 plank GWR wagon to give a size comparison
    Refer to the Gazette article and personalise your fleet
  • ImgGWR W12 Cattle Wagon insert kit £9.50
    Made to match the Warren Shepherd brass kit
  • ImgMade up Cattle Wagon insert to show the kit parts.
    Can be adapted for other Cattle and Ale wagons
  • ImgPlanked load pack, shows one pack £2.50
    Cut to size to represent a tallied pack load.
  • ImgThe wagon load and the pack that made it.